BatteryMinder Quick Connect /Disconnect End /Ring End Terminal

 

If you have several vehicles that need either the BatteryMinder 12 or 6 volt and you wish to leave the terminal permanently attached to the battery, then this is just what you need. Loosen and remove the battery terminal clamp nut on the positive terminal and slide the red colored ring end over the bolt. Replace and tighten the terminal clamp nut to the proper torque. Loosen and remove the terminal clamp nut on the negative side and slide the blue colored ring end over the bolt. Replace and tighten the terminal clamp nut to the proper torque. The 24 inch wire may stay permanently attached to the battery. To hook up simply plug the quick connect/disconnect plug ends together and your battery is connected.